Green Hat Kiteboarding- Wing Foiling Hardware Collection-North Sonar Session Saver Kit

Wingfoil Hardware

Green Hat Kiteboarding-Foilite Titanium Hydrofoil Track Lock Universal Track Nut Set of 4-Close up of complete set Green Hat Kiteboarding-Foilite Titanium Hydrofoil Track Lock Universal Track Nut Set of 4-Close up of complete set organised
$44.95
$44.95
Includes: (4) Titanium Track Lock T-Nuts, (4) Titanium M6 Set Screws, and (4) Titanium M8 Set Screws Foilite Titanium Hydrofoil Track Lock Universal Track Nuts The Only Titanium Universal Track Nut...
M8 Brass Foil Track Mount Hardware Set Hex and Torx M8 Brass Track Nuts
from $15.00
from $15.00
Description Foil Track Mount Hardware Set Hardware for mounting the foil to track mount systems. M8 is compatible with many brand foils (Slingshot, North, Cabrinha, Lift) but some do use M6 bolts ...
WizardHat Universal Foil Hardware Set WizardHat Universal Hardware Set
from $36.00
from $36.00
Short Description Includes: (4) 35mm T-Bolts and (4) Nuts, a set of (4) extra 30mm T-Bolts, and a WizardHat Decal  15mm Ratchet Wrench is optional.  Description Wizardhat Universal Foil Hardware Se...
M8 x 25mm Hex Bolts and nuts
$27.00
$27.00
Description Green Hat Stainless M8 Track Mounting Hardware Includes: 4 T-Nuts and 4 M8 Hex or Torx bolts in the size of your choice. Sizes: M8x16mm, M8x20mm, M8x25mm, M8x30mm
M6 x 25mm Hex Bolts
$27.00
$27.00
Description Green Hat Stainless M6 Track Hardware Includes: 4 T-Nuts and 4 M6 Hex or Torx bolts in the size of your choice. Sizes: M6x16mm, M6x20mm, M6x25mm, M6x30mm
M6 Stainless Steel Phillips Pan Head Screws M6x22mm Stainless Steel Phillips Pan Head Screws (2pk)
$4.00
$4.00
Description M6 Stainless Steel Phillips Pan Head Screws M6 Phillips Pan Head Stainless Steel Screws. Includes: (4) screws
M6x10mm Phillips Head Countersunk Screw
$0.50
$0.50
Description M6x10mm Phillips Head Countersunk Screw M6 Phillips Countersunk Screw. Includes: (1) screw
10% Off
Slingshot Hover Glide M6x20mm Stainless Steel Bolt
$5.99
$5.99
$6.66
Description M6x20mm Stainless Steel Bolt Hover Glide M6 x 20mm Stainless Tapered Bolt.  For a complete parts list, see the product page for your specific foil. NOTE: This screw set was previously...

Wingfoiling Hardware

The mounting plate connects the foil to the board. It must be compatible with the board's mounting system, typically using M8 or M6 bolts. Newer models may feature a detachable carbon fiber base plate for easier transport and setup.

The mast connects the mounting plate to the fuselage. Made predominantly from either carbon or aluminium, masts come in various lengths. Usually, 2 or 3 M6 or M8 bolts fasten the mast to the plate. Moreover, 2 or 3 bolts are needed to attach the Fuselage to the mast.

The fuselage connects the mast to the front and rear wings. Its length influences stability and responsiveness. 2-3 bolt hold the front wing and 2 screws hold the stabilizer in place.

Titanium Hardware Sets |Track Nuts & Torx/Hex Screws

Many modern hydrofoils utilize titanium hardware for durability and corrosion resistance. Crafted from high-grade titanium alloy, these screws offer unparalleled strength and durability while remaining lightweight, making them ideal for foiling. M6 and M8 options available as well as a range of sizes to accommodate every brand.

You'll also find an array of M6 and M8 TORX and HEX stainless steel and titanium tools to put any foil together!